Brand APC UPS System On Line UPS APC - Schneider Electric Make 10 KVA 1:1 Phase On-Line UPS

APC - Schneider Electric Make 10 KVA 1:1 Phase On-Line UPS


UPS System On Line UPS

Price: 136880

You save 89208

Introducing state of the art, Next Gen Online UPS

  • 94% efficiency (double-conversion mode)
  • 3ph or 1ph input (site configurable)
  • 0.9 power factor (9kW output)
  • SmartSlot for all management card options
  • Separate Bypass input allows “Hot Standby” operation
  • High-Power Charger: 3kW max
  • SMF/Tubular battery selectable
  • 40-70Hz input frequency range
  • Graphical LCD easy-to-use interface
  • 192V battery, single string

  • Reset default


    Smart UPS On Line Features & Benefits
    Automatic self-test
    Periodic battery self-test ensures early detection of a battery that needs to be replaced.
    User-replaceable batteries
    Increases availability by allowing a trained user to perform upgrades and replacements of the batter
    Audible alarms
    Provides notification of changing utility power and UPS power conditions
    Disconnected battery notification
    Warns when a battery is not available to provide backup power.
    Predicitive failure notification
    Provides early-warning fault analysis ensuring proactive component replacement.
    Generator compatible
    Ensures clean, uninterrupted power to protected equipment when generator power is used.
    Power conditioning
    Protects connected loads from surges, spikes, lightning, and other power disturbances.
    Input power factor correction
    Minimizes installation costs by enabling the use of smaller generators and cabling.
    Resettable circuit breaker
    Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
    Cold-start Capable
    Provides Temporary Battery Power When The Utility Power Is Out.
    Safety-agency Approved
    Ensures the product has been tested and approved to work safely with the connected service provider
    Frequency and voltage regulation
    Gives higher application availability by correcting poor frequency and voltage conditions without us
    Marketing Features
    Save time with easy and convenient remote/network accessibility
    Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitor
    Low operating and maintenance costs with proven reliability and intelligent battery management
    Intelligent battery management, pioneered by APC, maximizes battery performance and life through int
    Avoids costly power problems by keeping your IT equipment and data protected and available
    Network grade power conditioning protects from damaging surges and disruptive noise. The double conv
    Peace of mind that comes with full equipment compatibility and reliability of a leader
    Provides pure sine wave output which is recommended by server manufacturers using active power facto
    Rack/Tower convertible
    Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
    Plug-and-Play external batteries
    Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
    Flash upgradeable firmware
    Install maintenance releases of firmware remotely using FTP.
    InfraStruXure Manager Compatible
    Enables centralized management via the APC InfraStruXure Manager.
    Customize UPS capabilities with management cards.
    Network manageable
    Provides remote power management of the UPS over the network.
    Serial connectivity
    Provides management of the UPS via a serial port.
    LED status indicators
    Quickly understand unit and power status with visual indicators.
    Intelligent battery management
    Maximizes battery performance, life, and reliability through intelligent, precision charging.
    Temperature-compensated battery charging
    Prolongs battery life by regulating the charge voltage according to battery temperature.
    Hot-swappable batteries
    Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
    Automatic restart of loads after UPS shutdown
    Automatically starts up the connected equipment upon the return of utility power.
    Scalable runtime
    Allows additional run time to be quickly added as needed.
    Automatic internal bypass
    Supplies utility power to the connected loads in the event of a UPS power overload or fault.
    SRC10KUXI Features


    Output Specification
    Output Capacity (KVA )
    10 Kva
    Output Capacity (KW )
    9 Kw
    Output Power Factor
    0.9 Power Factor
    Output Phase
    1 Phase
    Other Output Phase
    Output Voltage
    230 Volt
    Other Output Voltage
    220 Or 240 Volt
    Efficiency at Full Load
    > 94 %
    Output Voltage Distortion
    <2 %
    Output Frequency (sync to mains)
    50/60Hz +/- 3 Hz
    Output Frequency (not synced)
    60Hz +/- 0.1% for 60Hz nominal, 50Hz +/- 0.1% for 50Hz nominal
    Load Crest Factor
    Output Voltage THD
    <3 %
    Transfer Time
    <0 Ms
    Output Waveform type
    Sine Wave
    Output Connections
    3 Pin Indian Socket (04 Nos.)
    Internal Bypass (automatic & manual)
    UPS Parallel Upto
    Overload Capacity
    General Specifications
    Flexible Battery Option
    Isolation Transformer
    Paralleling Options
    Rack Mounting Kit
    Paralleling Kit for Synchronising
    Input Specification
    Input Voltage
    230 Volt
    Other Input Voltage
    380 Or 400 Volt
    Input Phase
    1 Phase
    Other Input Phase
    3 Or 1 Phase
    Input frequency
    50/60Hz +/- 3 Hz
    Input Voltage Range (Output Derated)
    100 - 285 Volt
    Input voltage range for main operations
    160 - 285 Volt
    Input frequency Range
    40 - 70 Hz
    Input Power Factor
    > 0.98
    Input Connections
    Hard Wire 3 wire (1PH+N+G), Hard Wire 5-wire (3PH + N + G)
    Input Protection
    Resettable Circuit Breaker
    Batteries & Runtime
    Battery DC Bus
    192 - Vdc
    Maximum Charger Capacity
    13 Amp.
    Battery Position Option
    Internal Battery Capacity (VAH)
    Battery Type Compatibility
    SMF / Flooded Batteries
    Batteries Recharge Time upto 90%
    <6 Hrs.
    Approved Battery Capacity (AH)
    17 - 150 Amp.
    Communication & Management
    Control panel
    Multi-function LCD status and control console
    SNMP Management
    Power Management Software
    Interface Port(s)
    DB-9 RS-232, Smart-Slot
    Audible Alarm
    Audible and visible alarms prioritized by severity
    Audible noise at 1 meter from surface of unit
    <58.0 Decibal
    Maximum Height
    433 Mm
    Maximum Width
    134 Mm
    Maximum Depth
    706 Mm
    Shipping Height
    570 Mm
    Shipping Width
    275 Mm
    Shipping Depth
    790 Mm
    Net Weight
    27.5 Kg
    Shipping weight
    32 Kg
    Rack Height(U)
    3 U
    Operating Temperature
    0 - °C 50
    Operating Relative Humidity
    0 - 95 % Rh
    Operating Elevation
    0 - 1000 Meters
    Storage Temperature
    -15 - °C +60
    Storage Relative Humidity
    0 - 95 % Rh
    Storage Elevation
    0 - 15000 Meters
    IS 16242 (Part1): 2014
    Other Environmental Compliance
    IS 16242 (Part1): 2014
    Other Specifications
    Double Conversion Online
    Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
    Surge Protection


    Item Catalogue